| Product type designation | PROFIBUS OLM/G12 V4.0 |
| |
| Transmission rate |
| Transfer rate / with PROFIBUS | 9.6 kbit/s ... 12 Mbit/s |
| Transfer rate / with PROFIBUS PA | 45.45 kbit/s |
| Interfaces |
| Number of electrical/optical connections / for network components
or terminal equipment / maximum | 3 |
| Number of electrical connections | |
| ● for network components or terminal equipment | 1 |
| ● for measuring device | 1 |
| ● for signaling contact | 1 |
| ● for power supply | 1 |
| ● for redundant voltage supply | 1 |
| Type of electrical connection | |
| ● for network components or terminal equipment | 9-pin Sub-D socket |
| ● for measuring device | 2-pole terminal block |
| ● for power supply and signaling contact | 5-pole terminal block |
| Number of optical interfaces / for fiber optic cable | 2 |
| Design of the optical interface / for fiber optic cable | BFOC port |
| Optical data |
| Damping ratio / of the FOC transmission link | |
| ● for glass FOC with 50/125 µm / at 3 dB/km / maximum | 10 dB |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum | 12 dB |
| propagation delay [bit] | 6.5 bit |
| Connectable optical power relative to 1 mW | |
| ● for glass FOC with 50/125 µm / at 3 dB/km | -16 dB |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km | -13 dB |
| Optical sensitivity relating to 1 mW | |
| ● for glass FOC with 50/125 µm / at 3 dB/km | -28 dB |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km | -28 dB |
| Wavelength | |
| ● for glass FOC with 50/125 µm / compatible with interface / at 3
dB/km | 860 nm |
| ● for glass FOC with 62.5/125 µm / compatible with interface / at
3.5 dB/km | 860 nm |
| Wire length | |
| ● for glass FOC with 50/125 µm / at 3 dB/km / maximum | 3 km |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum | 3 km |
| Signal-Inputs/outputs |
| Operating voltage / of the signaling contacts / at DC / Rated value | 24 V |
| Operating current / of the signaling contacts / at DC / maximum | 0.1 A |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage | DC |
| Supply voltage / at DC / Rated value | 24 V |
| Supply voltage / at DC | 18.8 ... 28.8 V |
| Product component / fusing at power supply input | Yes |
| Consumed current / at DC / at 24 V / maximum | 0.2 A |
| Permitted ambient conditions |
| Ambient temperature | |
| ● during operation | 0 ... 60 °C |
| ● during storage | -40 ... +70 °C |
| ● during transport | -40 ... +70 °C |
| Relative humidity / at 25 °C / without condensation / during
operation / maximum | 95 % |
| Protection class IP | IP40 |
| Design, dimensions and weight |
| Design | compact |
| Width | 39.5 mm |
| Height | 112 mm |
| Depth | 74.5 mm |
| Net weight | 340 g |
| Mounting type | |
| ● 35 mm DIN rail mounting | Yes |
| ● wall mounting | Yes |
| Product functions / Redundancy |
| Product function / Ring redundancy | Yes |
| Standards, specifications, approvals |
| Standard | |
| ● for FM | FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone
2, Group IIC, T4 |
| ● for hazardous zone | EN 60079-0: 2006, EN60079-15: 2005, EN60079-28: 2007, II 3 (2) G Ex
nA [opis] IIC T4 KEMA 09 ATEX 0173X |
| ● for safety / from CSA and UL | UL 60950-1, CSA C22.2 Nr. 60950-1 |
| ● for hazardous zone / from CSA and UL | UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No.
213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 /
Zone 2 / Group IIC / T4 |
| ● for emitted interference | EN 61000-6-4 (Class A) |
| ● for interference immunity | EN 61000-6-2 |
| Certificate of suitability | EN 61000-6-2, EN 61000-6-4 |
| ● CE marking | Yes |
| ● C-Tick | Yes |
| Marine classification association | |
| ● American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| ● Bureau Veritas (BV) | Yes |
